How to Troubleshoot and
Repair Patio Door Locks
Keep your patio doors in good condition to guard your home from unwanted intruders. The elements can cause misalignment or damage to the
wood patio door repair doors as well as their locks.
You can fix your patio door lock on your own when it's not working correctly. These steps will fix issues with the latch, keyway, and handle.
Inspect the Lock
Patio doors are frequently targeted by burglars because of their huge glass size and their central location within a home. It is important to ensure your home's security. There are a few easy solutions to repair patio door locks that have stopped working.
The first step is to check the lock to see if anything is preventing it from latching or locking. If you notice any issues such as loose screws or rust, or even the wrong alignment, these must be addressed promptly. In some cases an adjustment of the position of the
patio door repair near me door could be enough to solve the problem.
Another common issue is dust or debris that can cause the lock mechanism to not function properly. To prevent this from happening, make sure to clean your
patio door repair company near me door regularly and wipe down the lock's hardware. You can apply a mild detergent solution when needed, but remember to dry the lock thoroughly afterward.
In addition, it is recommended to oil the lock regularly. The moving parts inside your uPVC patio lock are similar to those used in a precision-tuned machine. They can jam and get stuck just like any mechanical device. A graphite pencil, or a small amount of lubricant, can be used to remove any dirt or debris that has accumulated on the lock cylinder. This will keep it running at a high speed.
It is crucial to know the exact dimensions of the
patio door track repair door lock. This will help you find an appropriate lock that is compatible with your current mechanism. If you're not sure how to proceed, contact an expert locksmith or tradesperson for help.
Clean the Lock
The intricate parts of the door lock can become jammed due to dirt, dust and cold and hot weather. These issues can compromise your home security. These problems are easy to solve if you know what to do.
Clean your lock before attempting any repairs. Clean any stains and debris with a moist cloth. Use hot soapy water and a bit of grit to clean the mechanism of your lock. After you've cleaned your locks, allow them to dry completely before re-using them.
The majority of patio doors are secured with a mortise locking system. This is a safe lock, but it can also cause issues over time. If you find that your uPVC locks have become stuck, you should first clean and lubricate them. For an uPVC lock, you can start by cleaning the latch plate using a small amount of hot soapy water. Then, take off the screws that are holding the body of the latch in place. After you have removed the latch plate and handle then you can take it from its slot on the door frame.
Once the latch has been removed and lubricated, you can apply with a light engineering lubricant like WD40. If you don't own WD40 or similar product, you can try using a graphite pencil to help remove any dirt or grit within the mechanism. If your uPVC locks still don't work you might need to move the your lock cylinder. This requires additional tools and should be done by a professional. You can try shifting the cylinder, without taking it from the door by closing and opening the door with the cylinder in the lock position, then drawing pencil marks on the inside of the frame where the screws secure the cylinder.
Lubricate the Lock
When your lock is free of debris and dirt, it's a good time to lubricate your keyhole and locks themselves. The right lubricant will keep your lock in good shape and prolong its lifespan.
Dry graphite is an excellent option to lubricate tiny metal parts, such as locks. It's oil-free and non-sticky. It is also more durable than liquids. It's easy to use and can be used on sliding doors, garage door tracks, and hinges for doors. Master locksmith Shawn Fago suggests using a pencil-like graphite lubricant that is designed specifically for lock-cylinders.
Liquid lubricants may be more efficient than graphite powder, especially in humid climates. Silicone lubricants repel water and don't attract dust and dirt as much as other liquid fluids. They are efficient at low and high temperatures. However, certain silicone lubricants may create accumulation over time and could be displaced by other lubricants that you've used.
Teflon-based lubricants can be a great alternative to silicone lubricants because they're long-lasting and don't attract dust and dirt. They're also ideal for cold environments, as they can prevent ice buildup within the lock.
If your lock's cylinder feels stiff and difficult to turn, then it's probably worn out. It's going to need to be replaced. A professional locksmith will take apart the lock mechanism, and then install the cylinder of a new model that matches your current keys. They can also repair and modify existing locking mechanisms. A professional can also replace the lock cylinder if the door isn't equipped with one. This will increase security and safety. They can also install new lock faceplates on your patio door to are in keeping with the rest.
Reposition the Lock Cylinder
If cleaning and lubricating it do not work, then the issue could be due to the latch on the door is not properly aligned with the frame or jamb. Open the sliding patio door, and look up and down at the opening for the latch. If the door is aligned with the jamb or the frame and you are able to check, then it is. If not then loosen the screws that hold the latch in place and adjust it upwards or downwards until the lock latch catches the latch tightly when the door is shut.
Sometimes, the latch is difficult to close because of a worn-out cylinder. You'll require a new cylinder if the worn cylinder is making it difficult to turn the key. You should choose a cylinder with the same keyway and dimensions like the one that came before it. This allows you to change it quickly by removing the two halves and inserting the replacement cylinder.
Many home improvement stores sell replacement cylinders. You'll need the brand and model number of the existing cylindrical to purchase the replacement. If you don't have the manufacturer or model number then take a photo of the cylinder along with its mounting screws and go to an hardware store for assistance.
Once you have a new cylinder, unscrew the flat screw that is holding it in place and remove the escutcheon plate. Remove the lock cylinder, escutcheon, and door frame with the help of a screwdriver. Put the screw somewhere safe to ensure you aren't able to lose it. Then, loosen enough the set screw that is on the cylinder keep (the metal piece that fits into the rectangular hole in the door).
Replace the Lock
A patio door lock that isn't functioning properly could pose a serious risk to your security. It's not uncommon for dirt and debris to become lodged in the lock's mechanisms If this isn't addressed promptly, the lock can eventually fail and cease to provide security. It's a straightforward DIY project to replace the patio door lock. You only need just a few tools and a bit of time.
Begin by inspecting the lock to determine what's causing the problem. If cleaning and lubricating the lock latch fails, it may be bent too much to function properly. In this instance it is recommended to replace the latch with a brand new mortise lock so that it is as secure and strong as possible.
If you aren't comfortable tackling this DIY task yourself seek out a locksmith or door hardware expert to assist you with the installation of a new lock. They will have all the tools and expertise needed to install the lock correctly.
Keeping your patio door lock in good working condition is a matter of routine maintenance. Verify that the knobs and handles are not loose and tighten them as needed. Lubricate your lock at least once per year to prevent it from sticking or becoming stiff. Locks that have been subjected to heavy use or extreme temperatures should be lubricated frequently. It is essential to choose a lubricant that is specifically created for locks (WD-40's Specialist Dry PTFE Anti Friction or GT85). For the best results, apply the lubricant directly onto the key hole in the lock mechanism.