Sliding Patio Doors Repairs

Your sliding glass local patio door repairs doors help to let in more light and increase your home's energy efficiency. However, over time they could show signs of wear and tear, which will require some maintenance.

Most sliding patio door problems are relatively easy to repair. Find out how you can keep your sliding patio doors looking and working like new.

Dirty or Damaged Tracks

The tracks of your sliding patio door may be dirty or clogged. Over time, the dirt and grime of daily use can accumulate on the track. This could cause the door jam to become damaged or even break completely.

A regular cleaning of sliding doors and their tracks in your chores at home can help minimize this accumulation. Begin by sweeping or vacuuming any large debris from the tracks and then wipe them clean with warm water and a non-abrasive cleaning product like dish soap. A little vinegar added to your cleaning product can also help remove stubborn dirt and grease staining.

If you notice that your sliding door isn't able to move smoothly after completing these steps, it could be the sign of more severe damage that requires professional repair or replacement. There are a few simple fixes you can do before calling in professionals to avoid costly repairs or replacements.

It is essential to put a doormat near the bottom of your sliding doors in order to catch dirt before it has a chance to reach the tracks. Make sure to trim the plants and bushes that are near your sliding door to limit the amount of debris tracked into the tracks. Also, make sure you close the door correctly so that it doesn't hit the tracks and cause damage to the wheels and rollers. You can prolong the life of your doors by keeping them clean and lubricated.

Rollers that are not aligned

Sometimes, a sliding patio can become misaligned. It is usually due to obstructions or dirt which can be easily removed. However, it could also be due to a bent track or roller. In this instance, you can realign the rollers by taking them off with the adjustment screws, and then cleaning with the rubbing alcohol. Be careful, as these parts are delicate.

If your doors are stuck, you can apply lubrication to the rollers. This will lessen friction and allow them to slide more easily. Choose a silicone-based lubricant, since petroleum-based lubricants tend to attract dirt faster. It is essential to clean the rollers and tracks before applying lubrication.

After you've cleaned your rollers, you are able to reinstall them with the adjustment screws. Use the same lubricant that you used to clean them. Make sure you push the rollers all the way in their channels when reinstalling them. You can test the door and see if it moves smoothly.

If the problem persists it could be necessary to take the door off and inspect the tracks and rollers. If the tracks or wheels are badly bent they may require you to replace them. In such a case, it's a good idea to get an expert for the installation.

Warped Glass

Sliding glass doors are ideal for bringing in the outdoors and natural sunlight into rooms, however they can also be vulnerable to damages that require repair patio door or replacement. Some of the most common problems that arise are cracking, warping, and fade. Warping happens when the materials that comprise your sliding glass patio door begin to degrade due to sun, heat and other environmental factors. Cracking is often caused by impact damage such as the impact of a lawnmowers blade or ball that is smashed into the door. Fading typically occurs due to repeated exposure to sunlight as well as other elements.

If you have sliding glass patio doors that are hard to close and open it could be a sign that the rollers and tracks are not functioning properly. This could be due to the accumulation of dirt, rust, or debris in the track, or misaligned wheels or the lack of lubrication. This problem can be resolved by cleaning the rollers, tracks tilt and slide patio door repairs near me removing obstructions.

The locking mechanism could also be defective which makes it difficult to open tilt and slide patio door repairs close your sliding patio doors. This could be due to an issue with alignment or wear and tear however, a simple fix is to adjust the locking mechanism by turning the adjustment screws that are located on the bottom of the track.

Drafts or air leaks around your sliding patio doors are a frequent problem that can drastically decrease their energy efficiency. These problems are usually caused by weather stripping that has worn out or poor door alignment. This issue can be fixed easily by replacing the weather stripping and re-aligning your doors.

Loose Handle

If the handle of a sliding door is loose, it can be quite frustrating and make it difficult for people to open the door. This issue is usually caused by a misaligned locking mechanism, which can be fixed by loosening the screws that secure it and then tightening them until they fit against the door jamb.

A loose handle can also be caused by the handle breaking off from the spindle connecting it to the inside or handles outside. This is usually the result of a combination of factors, including over use wear and tear or just general ageing. If the issue isn't addressed quickly, it could eventually result in the whole handle becoming loose and potentially falling off entirely.

To fix this problem it is necessary to identify the screws that join the handles' exterior and interior. They are usually concealed by tabs made of plastic, which can be removed using a flathead screwdriver (or in the case of some handles, a Phillips head screwdriver). Keep these screws in a safe place to prevent them from being lost.

After the handles have been removed the next step is to remove the spindle that is loose. This can be accomplished by tapping the spindle with a mallet or hammer until it is free of its place inside the door. The new handle is fitted by placing the spindle into the hole for the handle inside and the other end into the exterior handle hole. After the handle is installed and tightened, screw back the screws, and then test to ensure the lock and unlock mechanism works correctly.

Poor weatherstripping

Weatherstripping that's damaged or cracked may let air and water be able to seep into your patio door, compromising your home's comfort and energy efficiency. In addition to allowing water, it can also cause drafts and increase your cooling or heating costs. It's simple to replace defective weatherstripping with no professional help. You can take off the old weatherstripping by either loosing the staples with an screwdriver, or gently prying it off with a putty knife and pulling it away from the door. You can then clean the area, and then apply a layer of weatherstripping that is backed with a foam seal. This will prevent leaks and increase the comfort.

If your sliding patio door isn't functioning as it should, you need to fix the issue as soon as possible to avoid further damage and to ensure that they are functional for years to come. Depending on the degree of the issue, DIY or professional repair/replacement may be the best solution.

The most common issues with sliding patio doors are dirty rollers due to debris in the tracks, wheels that are not aligned and a loose handle. In the majority of instances these issues can be resolved through regular maintenance and cleaning, including fluidizing the track, adjusting the rollers and tightening hardware. However, if these measures fail, it's advisable consult a professional for advice to make sure that your patio door is working exactly as it should. Before you decide to replace or repair your patio door, be sure to verify the warranty information to make sure that it's covered by the manufacturer's warranty. This can save you money on repairs or replacements in the near future.