Repairs to uPVC Windows

uPVC is a great option for modern homes. They are easy to maintain, durable and long-lasting. They are not susceptible to get rotten or rusty like aluminum or timber.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will prevent unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home and may even be fatal. It is essential to take the time to make sure that you're doing everything you can to ensure that your windows are in good condition.

Single-pane windows are fairly simple to replace and will usually fit into the frames of the past easily. If you have double glazed window repairs near me-paned windows which are joined by internal beading, it is harder to remove and replace the panes that were previously in use. In this case you'll need to locate some plastic spacers that will help the new pane to fit correctly into the window frame.

Wearing eye protection and heavy gloves is a must for anyone who plans to remove the glass yourself. It is also recommended to lay down a dropcloth before you begin working on the glass to ensure that any shards fall on the fabric instead of landing on the floor, where they could be trampled on and cause further damage.

It's a great idea cover the gap with tape after the glass has been removed. This will stop water and drafts from entering your property until a professional comes out to repair the window. This will also act as a barrier, preventing any intruders to gain access into your home. If the gap is particularly large, you may think about the security door with an integrated window, as this will offer the best of both worlds.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash windows. However, over time they may be afflicted by a variety of problems including sagging. A window repair near me that is sagging can cause problems with light, draughts and even security. It's important to take action as soon as you notice your uPVC windows are sliding.

Repositioning the hinges could help fix a window that is sagging. You'll first need to open the windows to reach the frame. After that, using a screwdriver, you can unscrew the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after having relocated your hinges. If you're satisfied with the fit, tighten the screws until they stay in place.

If you cannot reposition the hinges, you may need to replace the seal. Rubber seals can dry out and lose their elasticity with time, leading them to loosen. It is essential to replace your seal as quickly as you can to keep your uPVC window watertight and draughtproof.

uPVC handles could also loosen. Often it is due to screws that have come loose over time. However, it can occur because the handle mechanism has been worn out. It's a good thing that it's simple to repair the handle of a window that is loose yourself. First, you'll need to shut the window repair near me and then perform an initial fitting. The corners of the sash must align with the casing joint. If it isn't then you can use the screwdriver to loosen up the handle. Then, turn the mechanism into position.

3. Water Leaks

If you awake to damp floors and mouldy walls each time it rains it is important that you take action. Leaks of water from windows can cause structural damage to your home and also impact your ability to regulate the temperature of your home. The most common reason for leaking uPVC windows is that the sealant around the frame is damaged or missing.

It is a fairly easy fix that can be done by any competent DIYer. Depending on how serious the issue is, the old caulking might need to be removed. It is important to remember that when it is about uPVC window repairs, do avoid the temptation to "over-caulk in order to make the area more difficult to clean and could decrease the efficiency of your energy usage.

It is crucial to make sure that any drainage holes are free of debris and that the sill pan is angled properly so that it drains away from the window. In more extreme instances, you may need to replace the window.

Mold spots and rotted sills are another sign of water leakage. The fungus thrives in damp conditions and is able to quickly spread throughout the house.

It is also important to remember that if the leak is coming from between the glass of your double glazed windows it may be more likely to be an issue with the glass seal, rather than the frame or sliding. It is also possible to be repaired by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window repairs near me is difficult to open or if it opens in a breeze. They can be easily replaced by any competent DIYer and can usually be done within a few minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that have hinges and, like all mechanical parts, they are susceptible to wear and tear over time. It's easy to change a window repair hinge however it is easier if someone else helps you hold the frame.

Verify that the uPVC hinges open and close in the correct direction. This can be done by checking for the arrows on each hinge. This indicates the direction in which the window should open.

The issue could be caused by opening the window incorrectly or due to a poor installation at the factory. Sending us a picture through our website can often resolve the problem. We are more than happy to provide advice.

It is also crucial to grease the hinges on a regular basis. This can be done by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It also helps prevent corrosion and reduce the possibility of sticking. Ideally, you should perform this every year. WD40 or other solvent-based oils should not be used since they can cause damage to your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a few different things. The hinges can also become misaligned due to wear, creating gaps where the sash and frame meet. These can be easily repaired by giving them good cleaning, but in the event that they are beyond repair it may be necessary to get them realigned or replaced. The second is the interlock, which is on the hinge side of the window, may also become misaligned, again it may be possible to give them a thorough clean, however in some cases it might be necessary to have these replaced.

These seals are susceptible to wear and tear or get damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glasses. This will help regulate indoor temperatures, and reduce the possibility of draughts.

The final method to cut down on the amount of draughts is to use a draught-excluder. These are usually fabric tubes filled with a filler which can be put on top of your window sill. These will help to keep cold air out and keep your home warm and cosy!

With a bit of regular maintenance and repairs your windows made of upvc will continue to provide excellent insulation and security for your home. It is crucial to recognise that windows last for a certain period of time and eventually, they will reach the point when it's more efficient to replace them than repair them. If you are experiencing issues with your Upvc windows, it's recommended to seek assistance from a professional as soon as possible.