Replacement Handles For UPVC Windows

uPVC handles can loosen or break off. Fortunately replacing them is an easy task with the right tools.

Find the screws or pins holding it in place to determine the kind of handle. Once you've identified them, remove them and carefully drag the handle off its spindle.

Espag Handle

Espag handles are the most popular type of handle found on double-glazing uPVC windows. They're flat and have a circular shape. They're usually made of uPVC but can be made of other materials, based on the design and style of your window. The handle also comes in a variety of colors and shapes to suit your decor.

The espag handle is called a spade handle or the cockspur handle. It's used on older uPVC windows and is a good choice as an alternative for a damaged one. They're not as secure as modern handle styles however they do have an easy locking mechanism. The handle has a pair of round studs called mushrooms, that can move up and down when the handle is turned. They catch onto a steel plate that is known as a keep the frame. The handle is also available in a cranked model which provides more space to hold with a sleeker look. or an inline model.

These types of uPVC conservatory door handles are commonly found on double-glazed windows as well as older timber windows. They are typically made of aluminum or uPVC, but they may be made of other materials as well. Window handles made of Espag are locked by a key, or with wedge blocks that fit between the handle and frame. They are also easy to maintain and you can even purchase replacement parts for them if they break.

You should verify the size of the spindle located at the back of your handle before choosing the right espag handle. This should be a maximum of 7mm in diameter. Also, determine the height of the step where the handle is connected to the frame of the window. If you use the correct handle size the window will shut tightly.

Monkey tail handles for windows are a great option for older windows. They also work well with contemporary window styles and are available in right or left-handed versions. They feature a chic reeded detail at the end and a thin backplate that can be inserted into the frame of the window. These handles are also lockable and have a good step to height.

Venetian Handle

When you are replacing your upvc window handles there are many different styles of handle to choose from. There are Espag handles, Cockspur handles, spade or blade handles, and tilt and turn handles. The kind of handle you pick will depend on the type of windows you have and your personal preferences. Consider the size of the handles and the spindle. It is important to make sure that the new handle will fit into the screw holes and will have the correct spindle length.

The cockspur victorian door handle for windows made of upvc door handle is among of the most well-known types. They are available in a wide range of colors and finishes. There are locks and non-locking versions. The main difference between them is that a cockspur handle is able to be locked with keys. The keyed version is typically used for properties with high security and is more secure than the standard handle.

Venetian handles, just like Espagnolette handles, are generally connected by two bolts. They are low-projection from the frame and won't cut blinds like other window handles. They're also a great option for flats with high rises since they are able to be cleaned from the inside. Window handles are a great choice if you are looking for a stylish, practical replacement for your upvc Windows.

Whatever style of window you have, there is a handle that is suitable for the style of window you have. When you're selecting a replacement handle for upvc, you should consider the dimensions and shape of the screw holes, the step height and spindle length as well as handing. The handle should also be able to support the weight of the window when it is closed.

A tilt-and-turn handle is ideal for upvc window that opens from the side. It has a dual purpose and allows you to tilt and turn windows, which is great for ventilation, cleaning and security. It's also simple to operate, even with just one hand. The handle can lock the window in an open position or be swiveled to take in the fresh air without worrying that burglars will get inside.

Pear Drop Handle

If your uPVC window handle or lock is damaged, you'll probably be looking to replace it with a new model. This is a relatively simple task that is easy to do yourself. Firstly, make sure your window is shut and remove the screw at the base of the handle. After removing the two screws, the handle will come off. You'll then be able to access the multipoint lock, and take it off. Once the new handle is made, put it in the correct position. If your handle is equipped with an encapsulated screw, place it back on too.

Espagnolette handles are typically utilized on uPVC window frames. They are easily identifiable by their flat-strip shape and work with multipoint locks placed around the frame to provide top-of-the-line home security. They can open either left or right, and are available in a variety of colors.

Cockspur handles are a more traditional style of handle. They are popular with those who appreciate heritage enhancements, and for those who prefer a more traditional appearance. They have a shaft that runs through the handle into the gearbox. The gearbox then turns a set of shootbolt rods that secure the window.

Pear drop handles are a more modern option compared to cockspur style handles and provide the same level of security. These handles are a great choice for anyone who wants to modernize their windows while still keeping the historical feel of their home.

The Cornish Heritage Tear Drop Espag handle is a tribute to 19th Century Ironmongery. It is perfect for casement windows that are of a historic design and will provide your home with a stylish exterior. This handle can be paired with a teardrop operating stay and dummy remains to create a heritage window that is completely matching.

Selecting the right handle to replace your uPVC windows can be difficult, but our handy guide and useful advice will ensure that you get the best results. Bridgewater Glass can help you upgrade your complete window set or replace your existing uPVC handle and lock.

Tilt and Turn Handle

Tilt and turn handles are utilized on double glazing windows handles-glazed windows that swing to the outside and tilted back or down to allow for ventilation. The handle is rotated and a lock mechanism engages when the window is tilted into either position. These windows are very popular in Europe. They allow for better ventilation, and they are safer. To ensure functionality and security, the handle that replaces the uPVC u-turn handle should be compatible with both the window's type as well as the locking mechanism.

Tilt-and-turn windows are usually constructed from uPVC or aluminum and a timber frame being an alternative option for homeowners seeking a more traditional look and feel to their home. UPVC frames are the most affordable option, and provide excellent durability as well as energy efficiency and low maintenance requirements. Aluminum frames however are a more expensive option, but they offer the strongest strength and resistance to corrosion.

The uPVC handle turns and tilts in a similar manner as an espagnolette. However, it is more heavy and bulkier due to the fact that it is fitted to larger windows. They are also more durable because they have to withstand more force when the window is opened inwards or can be tilted.

When it comes to a replacement tilt and turn handle, the main thing to consider is the handle can be used to be locked into one of four positions, which will prevent the window being opened fully into the room. It is possible to do this using a lock key. This is especially useful when there are children in the area, since it stops them from opening the windows too much.

Therefore, the majority of tilt and turn window handles that are on the market will have this feature built into the standard model and the only exceptions are cheap Chinese-made items. Sealco Scotland stocks a range of top-quality tilt and turn handles from manufacturers like Hoppe Trojan and Sensei.

When purchasing a tilt and turn window handle, it is crucial to measure the existing handle to determine the best style to fit. You will need to measure the distance between the screw fixing holes, that are typically 43mm centre to centre. You may need to remove the cap covers or backplates that are sprung loaded from certain handles to expose the screw positions.