How to Replace the Replacement Key Battery For the Saab 9-3

Saab owners have to follow a series of special steps to install a second ignition key. It requires dealer support using a handheld computer dubbed Tech-2. A new key and transponder are required to be purchased and programmed to the car.

It is recommended to rotate your keys in order that one does not get damaged faster than the other. This will keep your keys in good condition.

Replacement Case

Contrary to the classic Saab keys of old, the new keys have electronic components that make it difficult to create a duplicate. This has made theft of cars considerably more difficult than it was just a few years ago. It has also made it more expensive to replace keys lost.

Every owner of a Saab 9-3 should have at a minimum two functioning keys. It's expensive to replace a lost key as it requires replacing the CIM module, and programming the locking cylinders. Dealers usually charge between $100-$200 to do this.

There are ways to avoid these costly costs. Some parts dealers will use the code of an old key to cut a brand new metal blade for a fraction of that of a dealer. The key must be exactly the same as the original in order for it to function in your vehicle.

Follow these steps to replace the case. You'll need a flathead and a lot of patience. With the screwdriver, pry off the plastic and then remove the emergency key. After the case is open, remove all electronics and place them into the new case. Place the key with the correct badge inside the case.

Replacement Battery

The Saab 9-3 replacement battery is a budget part that can be easily and quickly replaced. The YouTube video of Cyclone Cyd demonstrates the procedure for replacing the remote fob battery with just four simple steps. This tutorial should work for any modern saab key fob however the procedure might differ slightly.

The button is typically located near the saab key fob programming logo on the back of the fob. This button is typically located on the back of the fob, right next to the saab fob key replacement Logo. Use a flathead to insert the screwdriver through the small hole in this button. This should be enough to unlock the case of the fob so that you can replace the battery.

Once the new CR1632 battery is installed it is possible to reassemble the remote key fob and then program it to your car. The whole process should take more than an hour, if not less. This is a simple procedure that doesn't require special tools.

If you lose a key, the process is somewhat more complex but it is still able to be done. The dealer must read the car's VIN and then order a new key blade and TWICE module that has the exact unique code. After that, they'll have to cut the replacement key and then program it with a new software tool called MDI.

Replacement Key Fob

The key fob has an internal battery that is used to lock and unlock your vehicle. Batteries have a limited lifespan and will eventually die. It is a common problem in all vehicles. The good thing is that you can replace the battery in all key fobs, without having to replace the entire case. Amazon sells replacement fobs that have all the electronic components in place. You can simply pop the case open and replace the batteries. It is important to keep in mind that you'll need to take out the emergency key first, and you can do this by inserting an incredibly small screwdriver with a flat head into the slot in the middle of the case. The screwdriver should be moved around the case until it is split open, making it easier to remove.

If you are about to replace your keys, ensure you have a spare as this will reduce your total cost by a substantial amount. If you have a spare you can have the dealer cut an additional key and program it to the car, which is much cheaper than replacing the entire key fob.

If you do not have a spare key car key, you can add a second key to your car, but this requires a lot of research and effort. It costs around a hundred dollars to add a second car key. The computer of the car also needs to be programmed. This can be done by a professional, but it's a costly choice for the majority of owners.

Replacement Ignition

The new saab 9-3 key fob replacement 9-3 features an alarm system that is more sophisticated built around a key code. If you lose your sole key, it may be costly to replace it with another one because the car must be equipped with a specific computer and also be programmed to accept a new key. The majority of locksmiths aren't able to do this, and even dealers can charge several hundreds of dollars just to program the new key!

Dealers will charge you a premium to replace your car computer (also called the CIM or SAAB twice) in the event that you lose your only working key. We can reprogramme the existing EEPROM on your car's computer so that it is prepared for a new key. This will save you more than 50% off the cost you pay at an auto dealer.

If you've been an owner of a 03-11 SAAB 9-3, you likely have noticed that the ignition switch isn't really all that durable. If your ignition key is not working properly, you should look into replacing it. They can become sticky and the buttons are known to fall off. It's not as difficult as you think to replace the ignition key. With the proper tools, it can be accomplished in a matter of minutes.