Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are easy to maintain and durable, as well as long-lasting. They do not get rotten or rusty like aluminum and timber.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will help avoid unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge amount of damage to your home, which can make it extremely dangerous and possibly fatal. It is important to ensure that your windows are in good condition.

For single pane windows, it is relatively easy to replace windows, and the new one will generally fit within the frame that was previously installed easily. If windows with double panes are held together by internal beading, it is harder to remove and replace the old panes. In this situation it is essential to buy plastic spacers to aid in fitting the new pane into the window repair near me frame.

If you plan to attempt to remove the glass panes yourself it is crucial to wear the proper safety gear that includes gloves with a thick layer of material and eye protection. It is also an excellent idea to lay down a drop cloth before you begin working on the glass so that any fragments of glass fall on the fabric instead of onto the floor where they could be trampled on and cause further damage.

Once the glass is removed and the glass is removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to prevent water and drafts from entering the home until a professional is able to come out and fix the window. This also serves as a barrier to prevent any intruders from getting into your home. If the gap is particularly large, you might be interested in an alarm door that comes with an integrated window, as it offers the best of both worlds.

2. Sagging

uPVC windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber windows with sash. However, with time, they may be afflicted by a variety of issues, including sliding. A sagging window can cause problems with light, draughts and even security. It's important to take action as soon as you discover that your uPVC windows are falling down.

Repositioning the hinges could help fix a window that is sliding. First, you'll need to unblock the windows so you can access the frame. With the screwdriver, you'll be able to remove the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Once you've adjusted the hinges, shut your window and check for an appropriate fit. If you're happy with the fit, tighten the screws until they stay in the right place.

If you are unable to reposition the hinges, you could need to replace the seal. Over time rubber seals can lose their elasticity and dry out which causes their tightness to decrease. It is essential to replace your seal as soon as you can in order to ensure that your uPVC window waterproof and draughtproof.

UPVC handles can also become loose. This is typically caused by screws that have loosened over time, but it can also be due to the handle mechanism wearing out. It's relatively simple to fix a loose uPVC handle. First, you'll need to close the window and perform an initial fitting. The corners of the sash should be aligned with the casing joint. If it isn't you can use a screwdriver to loosen the handle. Then turn the mechanism to position.

3. Water Leaks

If you're waking up to damp floors and mouldy walls every time it rains it's important to take action. Windows that leak water do are not just a cause for degradation of your home's structure but also undermine your efforts to control the temperature in your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be accomplished by anyone who is a DIYer with the skills. Depending on the severity of the issue is, old caulking may need to be removed. It is essential to keep in mind that when it comes to uPVC window repairs, you should not be tempted to apply too much caulk and then make the area harder to clean and could reduce your energy efficiency.

Verify that the drainage holes are free of debris in them and ensure that the sill pan is properly angled to allow the water to drain from the window repairs. In more serious instances, you might have to consider replacing the window.

Other signs of long-term water leakage are rotted sills and the appearance of black spots of mold on the walls near the window. This fungus thrives in damp conditions and can quickly spread across the house.

It is also important to remember that if the leakage originates from the glass of your double glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sliding. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and open with a breeze, it may be hinges at the fault. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Nearly every home in the UK will have either top hung or side-hung uPVC windows that have hinges and like any mechanical part they are susceptible to wear and tear over time. It is essentially a very simple process, but it's simpler when you have a person to help hold the frame in place.

Verify that the uPVC hinges open and close in the right direction. Look for the arrows on each hinge to determine which direction the window should be opened.

Faulty window hinges can be caused by incorrectly opening the window repair in a particular way or by poor installation at the factory. Sending us photos through our website can often solve the issue. We are happy to give advice.

It is also important to lubricate the hinges on a regular basis. Applying a light engineering lubricant on the hinges is a great way to do this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window operate and close more smoothly. It can also stop corrosion and reduce the risk of sticking. This must be done at a minimum every year. WD40 or other solvent-based oils should not be used as they can damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by a variety of different things. Firstly the hinges, again because of wear and tear, can become misaligned, this can cause a gap to form where the sash meets the frame. If they're beyond repair, it could be necessary to get them re-aligned. The interlock, which is on the hinge side of the window and can be misaligned. Again, it may be possible to just give them a thorough clean, however in some cases it might be necessary to have these replaced.

These seals can wear down or become damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glasses. This will help to regulate indoor temperatures and lessen the possibility of draughts.

One of the most effective methods to reduce draughts is by using a draught excluder, these are usually fabric tubes that are filled with some type of filler. They can be placed on top of your windowsill. These will help to keep cold air out and keep your home warm and cosy!

With a little regular maintenance and repairs windows made of upvc will continue to provide a great level of security and insulation for your home. However, it is important to recognize that all windows have a life span and there may come an point at which it is more economical to replace them than fix them. If you are experiencing issues with your upvc window repairs windows, it is always best to seek professional assistance as soon as you can.