Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain, durable and long-lasting. In contrast to aluminium and timber, they do not get rusty or decay.

It is crucial to wash and oil UPVC windows and doors regularly. This will reduce repair costs as well as increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home and even be fatal. It is important to take the time to make sure that you're doing everything you can to keep your windows in good condition.

Single-pane windows are relatively easy to replace and typically fit into frames that were previously in use very easily. If you have double glazed window repairs-paned windows that are held together by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this instance, you will need to source some plastic spacers that help the new pane to fit correctly into the window repair near me frame.

If you're planning to attempt to remove the window panes yourself it is important to wear appropriate safety gear, including thick gloves and protective eyewear. It is also recommended to lay down a dropcloth before you begin working on the window panes so that any shards of glass fall onto the fabric, not onto the floor, where they could be trampled.

Once the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to stop drafts and water from entering the property until a professional can come out and repair the window. It also acts as a barrier, deterring any intruders to gain access to your home. If the gap is large, you might think about the security door with an integrated window as it will provide the best of both worlds.

2. Sagging

uPVC windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber windows made of sash. However, with time, they are susceptible to a range of issues, including sliding. A sagging window in uPVC could cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to shrink, it's important to act quickly to prevent the problem from worsening.

To fix a sagging window you can try repositioning the hinges. First, you'll need to unblock the windows to reach the frame. With a screwdriver, you can remove the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after having moved your hinges. If you're happy with the fit, tighten the screws to ensure they remain in position.

If you cannot reposition the hinges, you could have to replace the seal. Rubber seals can dry out and lose their elasticity over time, causing them to loosen. If this happens, it's important to replace the seal as soon as possible so that your uPVC windows remain watertight and safe from drafts.

uPVC handles could also become loose. Most often, this is caused by screws that have come loose over time. However, it could occur because the handle mechanism has worn out. It's a good thing that it's simple to fix a loose upvc window repair near me window handle yourself. First, you'll need to shut the window and perform an initial fitting. The corners of the sash need to be aligned with the casing joint. If it doesn't then you can make use of a screwdriver to loosen the handle and return the mechanism to its original its original position.

3. Water Leaks

It is important to take action if you wake up every morning to find mouldy walls and wet floors. The leaks of water through windows could cause structural damage to your home and hinder your ability to control the temperature of your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame is either damaged or is missing.

This is a simple fix that can be completed by any DIYer who is competent. Depending on the severity of the issue the caulking that was used up may require removal before a fresh layer is applied. It is essential to keep in mind that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk' as this will only make the area harder to clean and could reduce your energy efficiency.

Make sure that the drainage holes are free of debris in them and ensure that the sill pan is properly angled to allow the water to drain from the window. In more severe instances, you may need to replace the window.

Other signs of long-term water leakage are rotted sills and the appearance of black spots of mold on the walls near the window. The fungus thrives in humid conditions and can propagate quickly throughout the house.

If the leakage occurs between the double-glazed window, it is more likely that the problem is with the seal than the frame. Again this can easily be fixed by an upvc window repair window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open, or if it opens in the breeze. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Like all mechanical parts hinges are prone to be damaged over time. Changing a window hinge is essentially a very simple process but it can be easier to do when you have a person to assist in holding the frame in place.

Check that the uPVC hinges open and close in the right direction. Check for the arrows on each hinge to determine which direction the window should be opened.

The issue can be caused by opening the window improperly or due to a poor installation in the factory. It is usually possible to fix the issue by sending us a photograph on our website. We will be pleased to offer you suggestions.

It is also crucial to ensure that the hinges are lubricated regularly. This can be accomplished by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It can also prevent corrosion and reduce the risk of sticking. This must be done at a minimum every year. WD40 or other solvent-based lubricants should not be used since they can damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by a variety of different factors. The hinges may also become unbalanced due to wear, causing an opening where the sash and frame meet. These can be easily repaired by giving them a good cleaning, but in the event that they are beyond repair it could be necessary to get them realigned or replaced. Second, the interlock can also become unbalanced. This happens on the hinge's side and might require to be cleaned. In some instances it is possible to replace them.

The second most frequent cause of draughts is the window seals, these are susceptible to being worn out or damaged over time, and allow air to escape through the gaps. Installing high-quality weatherstripping is a good way to stop draughts. Replace the upvc windows with low-emissivity lenses. This will help regulate indoor temperatures and decrease the risk of draughts.

Another method of reducing drafts effectively is to use a draught-excluder. These are typically fabric tubes filled with a filler that can be placed over your window sill. They will help block out cold air and keep your home warm and cosy!

Your windows made of upvc will keep providing excellent insulation and security to your home with regular maintenance and repairs. It is important to remember that all windows eventually get worn out and it is more cost-effective to replace them instead of fixing them. If you encounter any issues with your upvc window you should consult a professional as soon as possible.