Sliding Patio Doors Repair

It is possible for sliding patio doors to become difficult to open and close. This can be due to many issues like dirty tracks or a misaligned slider.

Clean and lubricate your rollers. You can also re-align the rollers using adjustment holes located on the bottom side of the door panel that can be moved.

Dirty or Damaged Track

A dirty or damaged track can cause a sliding door to not move properly. Over time, dirt, grit, and even rust can build up making the track unable to slide smoothly. A gentle detergent and brush will do the trick. It's best to perform this task on a regular basis to ensure the smooth operation of your door and avoid the need for expensive repairs later on.

A leaky door is a common issue that requires prompt attention to prevent the growth of mold, water damage and structural degradation. Most often, the issue is due to worn weather stripping and doors that are not aligned properly, which can be fixed by replacing old weather strips and aligning the door.

Rollers that jump off the track are another problem that is often fixed with some simple DIY work. Get a partner to assist you in this endeavor, as the door can be heavy. To reposition the rollers, stand inside the house and lean one of the panels towards you. To prevent the panel from falling, place it on sawhorses after it has been lifted off the bottom track. Then, loosen the screws that hold each roller in place and remove them using the help of a screwdriver. You can now clean any dirt that is caught between the wheel and the tracks. You can then clean each wheel using denatured alcohol as well as a rag, then reposition the wheels and reattach them to their tracks.

If a section of the track is bent, it may be possible to straighten it by using a rubber mallet and block of wood. However, if the bent section is close to the hinges and is likely to cause further damage, you'll be better off calling an expert for safety reasons.

Rollers that are not aligned

If your sliding door is sliding poorly it's because the roller wheels aren't aligned with the track. The wheels could be dirty, rusted or their bearings have worn out. This creates friction between the floor of the door and the track, which causes it to snag or grind when it's closed or opened. This can also make squeaking noises.

This is a simple solution. You don't have to remove the door to access the wheels, as they are on a bracket that's adjustable. Use a screwdriver and find the adjustment holes on the frame (usually either side). Turn the screws to control the wheels. Turning the screw clockwise will raise the wheel while turning it counterclockwise lowers it. Continue to adjust until the door moves smoothly and quietly when open or closed.

It is essential to adjust the wheel prior to adjusting your latch. The latch hooks have to be aligned with the strike plate (the opening through which the latch locks) to allow the lock to work correctly. If you do not do this, the latch may accidentally open or shut while you are out of the room.

The sliding patio glass repair near me doors are an investment. Keeping them in good condition will ensure your family's safety. By addressing common issues like faulty tracks, rollers and handles, you can prevent costly repairs in the future. Contact our team to learn more about patio doors. We can help keep your sliding patio doors in great condition by assessing the repair needs. Our professionals can also assist with any replacement parts that you may need.

The door frame is loose or damaged

Sliding patio doors make a fantastic addition to any home. They provide a stylish and practical alternative to hinged or swing-open patio door options. Like any other hardware item sliding patio door repairs patio doors are prone to develop problems with time. Many of these problems are fixable with a little DIY skills.

A gap in the frame is a common issue with sliding patio doors. This could be due to various reasons, including misaligned track or rollers as well as a damaged or damaged door track or bent door frame. In the majority of cases the root of the problem can be easily fixed by removal of the door and reconnecting the track or rolling elements. It is important to be careful not to damage either the frame or the track.

In some instances, it might be necessary for the entire track to be replaced. This can be accomplished easily using the universal kit that is readily available at major hardware stores. These kits are easy to install and will get your door back to normal in no time at all.

Examine your sliding door hardware and frame for signs of wear, for example loose screws or bolts. This is an easy and efficient DIY patio maintenance procedure that can be done with a screwdriver. It is also essential to grease the rollers and tracks of your patio door to ensure smooth operation and to avoid premature wear.

For many homeowners the patio doors are their primary access to their backyard and outdoor living space. As such, they need to to function properly to ensure the safety of their home and offer security. By taking the time to follow these easy maintenance tips, homeowners can prolong the life span of their sliding patio doors and reduce expensive repairs or replacements.

Faulty Handle

sliding patio door repairs patio doors provide the perfect way to access your backyard and to enter your home, however they can be difficult to operate if they become damaged or misaligned. A damaged handle could cause the door not to shut or open properly. The good news is that fixing the handle that is loose is a fairly simple job that can be done at home.

In most cases the loose grip is a result of screws that have slipped out of the backplate. To fix the issue tighten the screws that are on the inside of the handle using the help of a screwdriver. If you notice that the handle is loose, it could be a sign that the threads have worn and will need to be replaced.

A broken latch could be the cause. It is more likely to happen if the latch is made of plastic, rather than metal. If the latch is not catching or turning you can try oiling it first to see if this can help. If this does not work, you may need to replace the lock.

If the handle is cracked or broken, it may be difficult to use. If this happens, you'll have to replace the handle with one that matches the style and design of your sliding patio repair near me doors.

If your patio doors are old and dated or new, Feldco can help you get them back on track. We have a variety of high-quality patio doors in various sizes and styles. To find out more about our products, call us today! We serve Southern California homeowners, including Ventura County and Orange County.

Afflicted Weatherstripping

If you're seeing light around windows and doors that are closed or you notice a draft pulsing on the door or window, it's time to replace your weather stripping. The strips form a tight seal that keeps unwanted air, pests, or water from entering your home. It also helps keep your heated and conditioned air in, saving you money on your energy bills all year long.

Depending on the condition of your weather stripping, it may have deflated, and lost its buoyant positive seal. This can be identified by taking a dollar note and running it under the seal between the top of the door frame as well as the bottom of the door jamb where they overlap. If the dollar bill slides easily between the seal and the door, it's time to replace the weather stripping.

If you replace only the worn-out section of weather stripping, this may cause problems in the future with the seal. It's much more efficient to replace the entire stripping. This will let you rest sure that your door will be sealed properly.

Follow our DIY guide to weather stripping to install the correct material on your sliding patio door and frame to ensure a strong, lasting seal. It's a great way to fix your door and reduce your energy bill and you shouldn't delay until it's too late. Your wallet and your home will thank you.