Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser can safeguard your prized property from theft. It is discreet and doesn't require additional key fobs.

The device makes use of buttons on your vehicle (steering wheels doors, door panels and the centre console) to create a unique pin code sequence that can be changed up to 20 times. This will then allow the vehicle to start.

Simple PIN code change process

With the rising rate of vehicle thefts, many owners are looking to improve their security. There are many different types of security products that are available for sale, from tracking systems to alarms and immobilisers. However, not all of these are equally efficient in protecting your vehicle. A tracking system can assist you in locating your vehicle if it's stolen however it cannot prevent the crime. An immobiliser, on the contrary does exactly what it says on the tin: it disables your car's engine so that it is unable to be started. The Autowatch Ghost is one of the most advanced options available, making it almost impossible for thieves steal your car.

Utilizing the buttons already in your car The ghost device generates an exclusive sequence that has to be entered before the engine starts. This can be accomplished using the indicator stalk or window buttons. There is also a mobile app that can be used as an emergency PIN override, which allows the driver how to install a ghost immobiliser operate their vehicle without the need to use the button sequence. This is an excellent option when you wish to donate your car to valet parking or maintenance. The immobiliser remains active.

The Ghost is a unique and innovative device which works in conjunction with the buttons on your vehicle rather than as a separate device. It is not only an effective deterrent to theft of your vehicle and vandalism, but it can also be used on any future vehicles you own. This makes it a better investment than a traditional wheel lock.

Weatherproof small device

The Autowatch range rover vogue ghost installer Immobiliser is an advanced security system that safeguards your vehicle from key cloning and hacking. It also prevents ECU swapping. It's a small weatherproof device that connects with the ECU of your vehicle directly over the CAN bus to disable the motor. It can be fitted into the vehicle without any wiring, and has been thoroughly tested to ensure compatibility with all vehicles. It also is resistant to jamming devices that are the most common method used by car thieves to circumvent existing immobilisers.

The benefit of using CAN data is that it runs silently when compared to conventional systems. It can't be detected by sophisticated RF scanning or code-grabbing technologies and is also undetectable by conventional diagnostic tools. The Autowatch ghost does not produce LEDs, but instead utilizes the buttons in your vehicle, such as the steering wheel or centre console panels to create a unique, programmable disarm sequence. You can even make this sequence up to 20 presses long to increase security. The iPhone app allows only one connection, using a unique pairing code for the Ghost. All communication between the two devices is protected.

The ford fiesta ghost installer will stop car thieves from putting in an ignition key replacement or replacing the ECU in order to bypass the immobiliser. It will only allow the engine to run when the correct PIN code is entered. It can also be put in valet/service mode to allow for temporary operation (with defined parameters like a 30mph speed limit) so that you can transfer your vehicle to a valet service for maintenance without having to enter a PIN.

Every vehicle is tested

The Autowatch Ghost is the first aftermarket immobiliser on the CAN bus that can be connected to your vehicle's existing wiring and connects to your engine control unit (ECU). The device detects electronic signals to disable the system of your vehicle from running its normal initialization process until you enter an individual passcode. The system can be activated and deactivated by using your smartphone's app without the need for wires.

Standard factory immobilisers on automobiles function through a transponder built into the key that transmits an indication to the ECU. The car will start if the correct code is transmitted. However, if the transponder of a different vehicle is used instead, the immobiliser doesn't recognise it. This enables the vehicle to start and be stolen. The Ghost immobiliser was developed by an South African company at the forefront of vehicle security systems technology. It shields your pride and joy from key cloning, hacking and even key theft. The only way a thief could take your vehicle is physically towing it away and even then, they wouldn't be able to drive it.

Ghost makes use of buttons in your vehicle, such as the indicator stalk, steering wheel, and doors, to generate an individual PIN code which must be entered to use your car. This is not required to use additional hardware, such as key fobs and can last up to 20 presses long. It is also undetectable to diagnostic equipment and doesn't transmit radio frequency signals so thieves are not able to make use of sophisticated RF scanning or code-grabbing technology to detect that a security system has been installed.

Contrary to physical anti-theft devices such as clamps or wheel locks Ghost is concealed within the vehicle so it can't be disabled or removed by thieves. It is more difficult to remove than a car alarm, which requires disarming with a button sequence. This makes it a great complement to a GPS tracking device, which can be used to locate your vehicle after it's been taken.

Emergency PIN code override

You don't have to look far on social media for stories or videos of vehicles that were stolen using the latest technology tools. This includes key-cloning and hacking tools that allow you to start your car without your original key fobs.

Our Ghost immobiliser combats this issue and offers an additional layer of security to stop your vehicle from being stolen in the event of being targeted by thieves. It is created by creating an individual pin code push sequence from your existing buttons on the steering wheel, door panel and the centre console. This unique PIN is entered in conjunction with your original key fob to stop the engine from getting started. The unique override pin is found on a black plastic card which you will receive following the installation. It is easy to remember because there aren't any LED indicators.

The device is hidden in the wiring of your vehicle and does not emit radio signals. This means it can't be detected by diagnostic software which can identify the type of security system you have installed. This makes it an excellent alternative to a tracking device.

Contrary to most security systems that use a relay inside the engine bay, these CANBUS Immobilisers connect with the vehicle's ECU and BCM via CAN data bus (brand dependant). This allows them to disable the vehicle completely by sending a digital block of commands for both the ECU and the engine.

It is also possible to connect a separate analog immobiliser, alarm, or tracker to these systems, but this has to be specified before installing the device. They are also service/valet-mode compatible and a good alternative to a tracker having your car in for repair at the dealer.

Service/Valet Mode

In recent years, there has been a rise in the number of vehicles being stolen from owners without keys. It's now more easy than ever to steal your pride and joy due to the availability of key cloning tools & door lock picks. To stop this, we now offer the autowatch ghost installation, https://ai-db.science/wiki/Three_Greatest_Moments_In_Ghost_Immobiliser_Birmingham_History, Ghost immobiliser that prevents your car from being driven even if your keys have been copied or your vehicle has been hijacked.

It communicates directly with your car's ECU (Engine Control Unit) via the data loop of CAN. It's completely silent since it doesn't use radio frequency or keys fobs. This means it isn't detected by diagnostics or any other car hacking devices. It also shields against the possibility of adding the key to a new one or replacing the ECU to get around the system as only the correct PIN code can allow the engine how to become a ghost immobiliser installer start.

The device is hidden inside your car and can be accessed by existing buttons on your steering wheel, center console and door panels. Before you can begin your car, you must enter a unique and reversible PIN code that can be as long as 20 numbers.

This is the first aftermarket immobiliser CAN bus that has been developed that can prevent your car from being started or driven away if a PIN code isn't entered first. If you are driving away with the device arming the indicator will flash on your dashboard that will flash continuously for approximately 300m. Entering your PIN code will turn off the anti-hijack. Your vehicle will continue to operate normally. If you don't enter your PIN code at this point, the indicator will continue to flash and require a new PIN code every attempt to start your car.