Protect Your Pride And Joy With The ghost immobiliser installers near me Immobiliser

Secure your prized possessions against theft by using the Ghost Immobiliser. It's discreet and does not require additional key fobs.

The device utilizes buttons on your vehicle (steering wheels doors, door panels and the centre console) to generate a unique pin sequence that can be modified up to 20 times. This then authorizes the vehicle to start.

Simple change of PIN code

With the rising rate of vehicle theft, a lot of owners are seeking to improve their security. There are many types of aftermarket security devices available from tracking systems to immobilisers and alarms. However there are a few that are equally effective in protecting your car. While a tracking system can assist in finding your vehicle in the case of theft, it does not stop the crime from happening in the first instance. Immobilisers, on the contrary are exactly what they state on the tin: they shut down the motor of your car so that it can't be started. The Autowatch ghost immobiliser fitting immobiliser is one of the most advanced options on the market, making it nearly impossible for thieves to steal your vehicle.

Utilizing the buttons already in your car, the ghost device creates a unique sequence which must be entered prior to the engine will start. This can be done using the heater, window or indicator stalk buttons. Additionally option, there is a mobile app which acts as an emergency PIN code bypass and allow the driver to operate the car without the button sequence. This is an excellent option if you want to give your car to valet parking or maintenance. The immobiliser will stay active.

The Ghost is a unique and innovative device that works in conjunction with buttons in your vehicle rather than being a standalone device. This means that it is not just a powerful deterrent against vehicle theft but also a transferable device over to any future cars you have, making it more valuable than the traditional lock on your steering wheel.

Weatherproof small device

The Autowatch Ghost alarm Installation near Me (cb1cb400.ru) Immobiliser is a high-tech security device that shields your car from key hacking and cloning. It also stops ECU swapping. It's a weatherproof and small device that communicates directly with your vehicle's ECU via the CAN data bus, which disables the engine. It can be installed in the vehicle without additional wiring and has been thoroughly tested to ensure compatibility with all vehicles. It also is resistant to jamming devices that are a popular technique used by thieves to circumvent immobilisers.

The advantage of using CAN data is that it runs silently in comparison to conventional systems. It can't be detected by sophisticated RF scanning or code-grabbing technology and is also undetectable by traditional diagnostic tools. The Autowatch ghost does not produce LED indicators and instead uses the buttons in your vehicle such as steering wheel or centre console panels to create a unique, changeable disarm sequence. You can even create a sequence that is up to 20 presses long to increase security. The iPhone app is limited to one connection, with an individual pairing code for the Ghost. All communication between the two devices is secured.

The Ghost prevents car thieves adding an ignition key that is not in use or replacing the ECU in order to bypass the immobiliser. It will only allow the engine to start only if the correct pin code is entered. It can also be put into valet/service mode for a temporary operation (with specified parameters, such as a 30mph speed limit) so that you can give your car to a valet service or for maintenance without having to enter a PIN.

Tested for each vehicle

The Autowatch Ghost is a world-first aftermarket immobiliser CANbus. It can be connected to the vehicle's wiring and to the engine control unit (ECU). The device snoops on electronic signals to disable the system of your vehicle from performing its normal start-up routine until you input a custom passcode. The system can be activated and deactivated through your smartphone's application without the need for additional wires.

Standard factory immobilisers for vehicles function by using a transponder built into the key that transmits a signal to the ECU. If the correct code is transmitted, the car will start, but if a transponder is replaced by one from a different vehicle, the immobiliser cannot recognize it. This allows the vehicle be started and stolen. A South African company that is at the forefront of safety systems technology has developed the Ghost immobiliser. It protects your car from hacking, key cloning and even key theft. The only way a thief could take your vehicle is physically towing it away and even then, they would not be allowed to drive it.

bmw m4 ghost installer uses buttons on your vehicle, like the indicator stalk, the steering wheel, as well as the door panels, to create unique PIN codes that needs to be entered to use your car. This is done without any extra hardware, such as keys fobs. It can take up 20 to 20 presses. It is also undetectable by devices for diagnosis and transmits radio frequency signals, so thieves cannot use sophisticated RF scanners or code-grabbing technologies to detect that an installation has been made.

ghost installation is harder to remove than car alarms that require disarming using several buttons. This makes it an excellent supplement to a GPS tracker, which can help locate your vehicle after it has been taken.

Override of emergency PIN code

You don't have to look far on social media to find stories or even videos of vehicles that were stolen by car thieves using the most advanced technology tools available to them. This includes key-cloning devices and hacking tools that allow thieves to start the car without your original keys.

The Ghost immobiliser was designed to stop this and provide you with an extra layer of security in order to prevent your vehicle from being targeted by thieves. It generates a unique pin code by pressing the buttons on your steering wheel, door panel, and the centre console. The unique pin code is entered along with the original key fob to prevent the engine from getting started. The unique override pin can be found on the black card you will receive following installation. It's easy to remember because there are no LED indicators.

The device is hidden within the wiring of your vehicle and doesn't emit radio signals. This means it can't be detected by diagnostic software that can determine the security system you have installed. This makes it a great alternative to a tracker.

Unlike other security systems, which rely on a relay in the engine bay, these immobilisers CANBUS communicate through CAN databus (brand dependent) with the ECU and BCM of the vehicle. This enables them to shut down the vehicle completely through an electronic block of commands that is sent to both the ECU and the engine.

These systems can also be linked to an analog alarm immobiliser or tracker. This must be specified prior to the installation. They are also fully service/valet mode compatible and a great alternative to a tracker if you are having your car in for repair at the dealer.

Service/Valet Mode

In recent years, there has seen an increase in the number of cars being stolen without the owners keys. It's easier than ever to steal your pride and joy due to the availability of key cloning devices and door lock picks. We have developed the Autowatch Ghost Immobiliser to combat this. It prevents your vehicle from being driven even if your keys have been copied.

It communicates directly with your car's ECU (Engine Control Unit), via the data loop of CAN. It's completely silent since it doesn't use radio frequency or keys fobs. This means that it can't be detected by diagnostics or other car hacking devices. It also prevents you from adding the new ECU or key to circumvent the system, because only the PIN number allows the engine to start.

The device is hidden in your car and can be accessible via buttons on your steering wheel, the centre console, and door panels. A unique and reversible PIN code sequence up to 20 digits needs to be entered prior to being able to start your car.

This is the first aftermarket immobiliser for CAN bus to be created that will stop your car from being driven away or started without a PIN code being entered before. If the device is activated and you try to drive off it will display a warning on your dash which will flash on a regular basis for approximately 300m, if you enter your PIN code during this time, it will deactivate the anti-hijack device and your car will continue to drive in the normal way. If you do not enter your PIN in this moment, the indicator will continue to flash and will require a new PIN each time you attempt to start your vehicle.